Highlights
Dolby Pro Logic II processing
Logic 7 (5.1) processing
DTS 5.1 processing
HDMI switching
HDTV-ready
Component video inputs
Triple-crossover bass manager
High-current capability
192kHz/24-Bit DAC
The AVR 142 is all about getting connected - digitally. It features three HDMI inputs,
two wide-bandwidth HDTV-ready component video inputs, a front-panel input for
video games, an auxiliary input for portable media players, and a portfolio of advanced
surround-processing technologies, including Dolby Digital, DTS and Logic 7 processing.
With the AVR 142, your speakers never heard it so good!
Key Specifi cations
Audio Section - Continuous Average Power (FTC), (stereo mode): 40 watts per channel
into 8 ohms @ 20Hz - 20kHz, <0.07% THD, both channels driven; (fi ve-channel
surround mode): 70 watts per channel into 6 ohms @ 1kHz, <0.07% THD, one channel
driven; 35 watts per channel into 8 ohms @ 20Hz - 20kHz, <0.07% THD, all channels
driven; High Instantaneous Current capability (HCC): ±25 amps
Tuner - Usable Sensitivity: IHF 1.3μV/13.2dBf; THD at 1kHz with 100% modulation,
(mono): 0.2%; (stereo): 0.3%; FM Adjacent Channel Selectivity: ±400kHz, 70dB;
Ultimate (maximum) S/N Ratio (measured at 1mV RF input level), (mono): 70dB;
(stereo): 68dB
Dimensions (H x W x D) and weight: 165mm x 440mm x 382mm, 10.9kg
Features
Power
70W x 5 into 6 ohms, 1kHz, at <0.07% THD, one channel driven
35W x 5 into 8 ohms, 20Hz - 20kHz, at <0.07% THD, with all channels driven simultaneously
High-current (±25 amps), ultrawide-bandwidth (10Hz - 100kHz) amplifi er design
Surround Processing
Dolby Digital surround decoding using an advanced Cirrus Logic CS 49510 32-bit DSP processor
Full suite of DTS modes
DTS 5.1 (Movie, Music and Game modes) surround sound
Harman-exclusive Logic 7 Cinema and Music surround sound processing in 5.1 channels
Dolby Headphone and Dolby Virtual Speaker surround modes
Five-channel Stereo, Hall and Theater surround modes
192kHz/24-Bit DAC
Connectivity
Three HDMI inputs and one HDMI output
Two assignable, wide-bandwidth (100MHz), HDTV-ready component video inputs and one output
Subwoofer output for direct connection to a powered subwoofer
Three A/V inputs, plus two audio-only inputs
Six-channel-direct inputs for use with external surround decoders
Convenient front-panel audio/video input for use with video games or portable players
Six digital inputs (two optical and two coaxial on rear panel, and one optical and one coaxial on front panel)
One coaxial digital output on rear panel
Front-panel auxiliary input for connecting portable media players
Ease of Use
HDMI switching
A/V Sync Delay adjustable for each input
FM stereo/AM tuner with 30 presets and direct-access tuning
Triple-crossover bass manager
Wide range of low-frequency crossover points (40Hz, 60Hz, 80Hz, 100Hz, 120Hz and 200Hz) available
Programmable power-up volume
Six-device, preprogrammed system remote contro


Denumiri similare la Amplificator Harman/Kardon AVR 142: AVR142

Galerie