Thermaltake Frio Advanced CLP0596

Thermaltake Frio Advanced CLP0596

de la 285,21 RON 2 oferte
Localizare:
Traseu sugerat:  
Descrierea produsului
Cooler pasiv / activ  Activ
Tip cooler Processor
Numar rotatii pe minut 2000 rpm
Volum de aer  88.77 CFM
Marimi 131 x 122 x 159 mm
Greutate 954 g

Ați găsit greşeli în descrierea produsului? Vă rugăm să ne trimiteți o notificare!

Cooler Thermaltake Frio Advanced, 5 heatpipe-uri de 6mm, 2x 130mm push-pull fans (800-2), CLP0596 Specificatiile producatorului Thermaltake Frio Advanced 5 heatpipe-uri de 6mm 2x 130mm push-pull fans (800-2000 RPM, 88.77 CFM, 21-44 dBA, PWM) compatibil Intel LGA775, LGA1155, LGA1156, LGA1366, LGA2011 / AMD AM2, AM2+, AM3, AM3+, FM1 dimensiuni: 130.6(L) X 122(W) x 159.2(H) mm SpecificationP/NCLP0596Dimension130.6(L) X 122(W) x 159.2(H) mmMaterialAluminum FinsAluminum BaseHeatpipe6mm x 5PCSWeight954gRated Voltage12VStart Voltage6VRated Current0.5APower Consumption6W (Max)Fan Speed800~2000RPMMax. Air Flow88.77CFMMax. Air Pressure2.7 mmH2ONoise21~44 dBAConnector4Life Expectancy50,000 HoursCompatibilityIntelLGA 2011LGA 1366Core i7LGA 1155/1156/1150Core i7 / Core i5 / Corei3LGA 775Core 2 Extreme / Core 2 Quad / Core 2 Duo / Pentium D / Pentium 4/Pentium / Celeron D / CeleronAMDFM1A-seriesAM3+ / AM3Phenom II / Athlon II / Athlon / Sempron seriesAM2+ / AM2Phenom II / Phenom / Athlon / Sempron series- Heat-pipe Direct Touch Technology, Supports 230W Cooling Performance - Dual 13cm Over-clocking Fan, PWM controllable with 800~2,000 RPM Speed - Universal Socket Compatibility & Accessory PackageDetailed FeatureHeat-pipe Direct Touch Technology, Supports 230W Cooling Performance- 5 x Ø6 mm heat-pipes direct touch CPU surface increasing heat conductivity. - High density Aluminum fins allow larger surface area to quick dissipate heat. - Premium thermal grease maximizes heat transfer from the CPU into the cooler base for rapid dissipation. Dual 13cm Over-clocking Fan, PWM function with 800~2,100 RPM Speed- A pair of high performance red bladed fans generate excellent cooling power. - Tool-less fan installation provides great convenience for users. - Vibration-absorbent gaskets decrease noise during operation. - Fan speed at the lowest RPM provides good performance and very low noise. Universal Socket Compatibility & Accessory Package- All-in-one back-plate design, offers support for all Intel and AMD platforms - Universal socket support : Intel: LGA 2011, LGA1366, LGA1156, LGA1155, LGA775AMD: FM1, AM3+, AM3, AM2+, AM2 DimensionIntel Motherboard InstallationStep 1Step 2Step One: Insert the four long screws through the back-plate into the four holes on the motherboard and secure them with the four plastic spacers. Step Two: Put the two Intel mounting bars along the four long screws and secure them with four nuts. Step 3Step 4Step Three: Remove two fans from the cooler before installation. Step Four: Securing the two T-mounting bars to the base of cooler by short screws. Step 5Step 6Step Five: Applying a thin layer of thermal greaseStep Six: Place the assembled heat-sink onto the CPU and tighten each fixing bolts evenly. Step 7Step 8Step Seven: Place a fan to the fan duct at a slanted angle and push the top of fan until hearing a click sound. Repeat steps for the other fan. Step Eight: Connect the 4-pin wire to the motherboard’s CPU fan connector. Installation is done. AMD Motherboard InstallationStep 1Step 2Step One: Insert the four long screws through the back-plate into the four holes on the motherboard and secure them with the four plastic spacers. Step Two: Put the two AMD mounting bars along the four long screws and secure them with the four nuts. Step 3Step 4Step Three: Remove two fans from the cooler before installation. Step Four: Securing the two T-mounting bars to the base of cooler by short screws. Step 5Step 6Step Five: Applying a thin layer of thermal greaseStep Six: Place the assembled heat-sink onto the CPU and tighten each fixing bolts evenly. Step 7Step 8Step Seven: Place a fan to the fan duct at a slanted angle and push the top of fan until hearing a click sound. Repeat steps for the other fan. Step Eight: Connect the 4-pin wire to the motherboard’s CPU fan connector. Installation is done. Airflow Chart
Denumiri similare la Cooler Thermaltake Frio Advanced CLP0596: Frio Advanced CLP 0596, FrioAdvancedCLP0596
Păreri
Intrebari&Raspunsuri

Prețurile și informațiile de pe paginile noastre sunt furnizate de magazinele partenere și au caracter informativ, unele erori pot apărea. Imaginile produselor au caracter informativ, uneori pot include niște accesorii care nu sunt mereu incluse în pachetul de baza. Informațiile aferente produsului (imagine, descriere, preț) se pot schimba fără notificare prealabilă. Compari.ro nu își asumă responsabilitate pentru eventualele greșeli.

^