OPERATING MODES  802.11a/b/g/n Aruba Instant AP802.11a/b/g/n Mobility Controller-managed APAir monitor (AM) for wireless IDS, rogue detection and containmentSpectrum analyzerSecure enterprise meshRemote AP (RAP) when used with a Mobility Controller  WIRELESS RADIO SPECIFICATIONS  AP type: Indoor, dual radio, 5-GHz and 2.4-GHz 802.11n 2x2:2Software-configurable dual radio supports 5-GHz (Radio 0) and 2.4-GHz (Radio 1)2x2 MIMO with two spatial streams and up to 300 Mbps wireless data rateSupported frequency bands (country-specific restrictions apply):2.4000 to 2.4835 GHz5.150 to 5.250 GHz5.250 to 5.350 GHz5.470 to 5.725 GHz5.725 to 5.850 GHzSupport for up to 255 associated client devices per radio, and up to 16 BSSIDs per radioAvailable channels: Dependent on configured regulatory domainDynamic frequency selection (DFS) optimizes the use of available RF spectrumSupported radio technologies:802.11b: Direct-sequence spread-spectrum (DSSS)802.11a/g/n: Orthogonal frequency-division multiplexing (OFDM)Supported modulation types:802.11b: BPSK, QPSK, CCK802.11a/g/n: BPSK, QPSK, 16-QAM, 64-QAMTransmit power: Configurable in increments of 0.5 dBmMaximum (aggregate, conducted total) transmit power (limited by local regulatory requirements):2.4-GHz band: +21 dBm (18 dBm per chain)5-GHz band: +21 dBm (18 dBm per chain)Advanced Cellular Coexistence (ACC) minimizes interference from LTE cellular networksMaximum ratio combining (MRC) for improved receiver performanceCyclic delay/shift diversity (CDD/CSD) for improved downlink RF performanceShort guard interval for 20-MHz and 40-MHz channelsSpace-time block coding (STBC) for increased range and improved receptionLow-density parity check (LDPC) for high-efficiency error correction and increased throughputSupported data rates (Mbps):802.11b: 1, 2, 5.5, 11802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54802.11n: 6.5 to 300 (MCS0 to MCS15)802.11n high-throughput (HT) support: HT 20/40802.11n packet aggregation: A-MPDU, A-MSDU  POWER  Maximum power consumption: 9.5W (POE) or 8W (DC)Power sources sold separatelyDirect DC source: 12 Vdc nominal, +/- 5%Power over Ethernet (PoE): 48 Vdc (nominal) 802.3af or 802.3at-compliant source  ANTENNAS  Two integrated dual-band downtilt omni-directional antennas for 2x2 MIMO with maximum antenna gain of 4.0 dBi in 2.4 GHz and 4.5 dBi in 5 GHz. Built-in antennas are optimized for horizontal ceiling mounted orientation of the AP. The downtilt angle for maximum gain is approximately 30 degrees.   OTHER INTERFACES  10/100/1000BASE-T Ethernet network interface (RJ-45)Auto-sensing link speed and MDI/MDX802.3az Energy Efficient Ethernet (EEE)PoE-PD: 48 Vdc 802.3af PoE or 802.3at PoE+DC power interface, accepts 1.7/4.0-mm center-positive circular plug with 9.5-mm lengthSerial console interface (proprietary; optional adapter cable available)Visual indicators (LEDs):Power/system statusEthernet link status (ENET)Radio status (2x; RAD0, RAD1)Kensington security slotReset button    


Denumiri similare la Router HP JL188A: JL 188 A, JL 188A, JL188 A

Galerie