A.J. van den Hul The Emerald Amplificator

A.J. van den Hul The Emerald Amplificator

de la 68 750,00 RON 2 oferte
Localizare:
Traseu sugerat:  

Ofertele pentru produsul

 

Van den Hul Preamplificator Van den Hul The Emerald

68 750,00 RON
Livrare gratuita
In stoc
spre magazin »
avshop.ro
 

Van Den Hul Preamplificator Van den Hul The Emerald

68 750,00 RON
Detalii de livrare la magazin
spre magazin »
stereomag.ro

Evoluţie preţ

Puteti obtine informatii privind evolutia pretului
 
preţ minim
 
preţ mediu

Alerta pret

Serviciul Alerta pret va anunta daca pretul produsului ales scade sub suma precizata.
Pretul minim actual al produsului: 68 750,00 RON

Descrierea produsului
Specificatii:   Mains voltage: optional 230V or 115V Weight: 19kg (w/o ext. transformer housing) Input connectors and input resistance: Remote controlled inputs: 2 balanced stereo inputs + 2 unbalanced stereo inputs Input resistance: 10KOhms resp. to ground       Output connectors and output resistance - output: 1 balanced stereo output + 1 unbalanced stereo output. both outputs (bal. + unbal. ) are simultaneously available if input resistance of the following power amplifiers are above 10KOhms in parallel circuit. - output impedance (on all outputs): appr. 350 Ohms - output voltage: >= 6Vss on balanced output.   Bandwidth and distortion - appr. 5Hz ... 20KHz +- 0.2dB - distortion: less 0,01% (1KHz) at 1Vrms at balanced output.   Level adjustment remote controlled 128-step level attenuator with special low-level signal relais (switched resistor array with constant input resistance) with 0,75dB/step max. attenuation: -95,25dB. The step level attenuator circuit also makes possible a channel balance adjustment and a signal muting function, also operated by the infrared remote control.     Balanced Preamplifier   The Emerald balanced preamplifier is the next logic step after the introduction of The Grail SB. Stereo line-level preamplifier, fully balanced amplifier design with special "accumulator simulation" power supply (ASPS) design. The transformer resides in an external housing. The amplifier design allows so-called mixed mode operation (balanced-to-unbalanced and vice versa). So a combination like "unbalanced in / balanced out" is also possible like balanced in / unbalanced out" or "unbalanced in / unbalanced out" resp. "balanced in / balanced out". Amplifier circuit design with no overall negative feedback and cascaded input stages plus MOSFET output stages. All functions are controlled by an infrared remote control milled from a solid aluminium block. Status indication (choosen input, level attenuation, balance control etc. ) by liquid crystal display (LCD) at the amplifier front.   We have used the same design ideas from our Grail SB, like the complete balanced DC coupled circuitry, HF PCB with 24 carat gold connections and 0.1% precise selected components. The very innovative electronic circuitry is able to handle a mix of balanced and unbalanced signals both on the input and output. To adjust all essential replay values, a remote control is part of the design. The channel to be used, the replay levels and possible channel unbalance can be fine-tuned. To avoid any spurious signals and magnetic induction, the amplifier housing is made of 6 & 10 mm thick steel. Specifically, the very natural and specific spacious replay is a benchmark of The Emerald. The very high resolution in combination with the natural dynamics in replay is another remarkable property. ]]>


Denumiri similare la Amplificator A.J. van den Hul The Emerald: TheEmerald


Galerie

Păreri
Intrebari&Raspunsuri

Prețurile și informațiile de pe paginile noastre sunt furnizate de magazinele partenere și au caracter informativ, unele erori pot apărea. Imaginile produselor au caracter informativ, uneori pot include niște accesorii care nu sunt mereu incluse în pachetul de baza. Informațiile aferente produsului (imagine, descriere, preț) se pot schimba fără notificare prealabilă. Compari.ro nu își asumă responsabilitate pentru eventualele greșeli.