Highlights
Dolby TrueHD decoding
Logic 7 (5.1 and 7.1) processing
DTS-HD Master Audio decoding
HDMI repeater with 1080p upscaling
Faroudja DCDi Cinema video
EzSet/EQ equalization
HDTV-ready
Component video inputs
Quadruple-crossover bass manager
Multiroom audio
High-current capability
192kHz/24-Bit DACs
The Harman Kardon AVR 260 combines ease of use with sophisticated features for the
best in digital sound. With advanced surround-sound technologies (including Dolby, DTS
and Logic 7 processing) and Faroudja DCDi Cinema video processing with upscaling up to
1080p, the AVR 260 ensures an optimal user experience. Plus, with EzSet/EQ equalization,
the system is just as easy to set up as it is to listen to.
Key Specifications
Audio Section - Continuous Average Power (FTC), (stereo mode): 65 watts per channel
into 8 ohms @ 20Hz - 20kHz, <0.07% THD, both channels driven; (seven-channel
surround mode): 120 watts per channel into 6 ohms @ 1kHz, <1% THD, one channel
driven; 50 watts per channel into 8 ohms @ 20Hz - 20kHz, <0.07% THD, all channels
driven; High Instantaneous Current Capability (HCC): ±35 amps
Tuner - Usable Sensitivity: IHF 1.3μV/13.2dBf; THD at 1kHz with 100% modulation, (mono):
0.2%; (stereo): 0.3%; FM Adjacent Channel Selectivity: ±400kHz, 70dB; Ultimate
(maximum) S/N Ratio (measured at 1mV RF input level), (mono): 70dB; (stereo): 68dB
Dimensions (H x W x D) and weight: 165mm x 440mm x 382mm, 12.3kg
Features
Power
120W x 7 into 6 ohms, 1kHz, at <1% THD, one channel driven
50W x 7 into 8 ohms, 20Hz - 20kHz, at <0.07% THD, with all
channels driven simultaneously
High-current (±35 amps), ultrawide-bandwidth (10Hz - 100kHz)
amplifier design
Surround Processing
Full suite of Dolby surround decoding, including Dolby TrueHD
and Dolby Digital Plus using an advanced Cirrus Logic
CS 49700 32-bit DSP processor
Full suite of DTS modes, including DTS-HD, DTS-HD Master
Audio, DTS-ES 6.1 Discrete & Matrix, DTS Neo:6 and
DTS 96/24
Dolby Pro Logic IIx (Movie, Music and Game modes) surround
sound
Harman-exclusive Logic 7 Movie, Music and Game surround
sound processing in 5.1 and 7.1 channels
Headphone and Virtual Speaker surround modes
Five- and seven-channel Stereo, Hall and Theater surround
modes
192kHz/24-Bit DACs
Connectivity
Three HDMI inputs and one HDMI output with 12-bit Deep Color
and xvYCC pass-through
Two assignable, wide-bandwidth (50MHz), HDTV-ready
component video inputs and one output
Subwoofer output for direct connection to a powered subwoofer
Four A/V inputs with S-video, plus two audio-only inputs
Eight-channel-direct inputs for use with external surround
decoders
7.1 Preamp outputs allow the use of external amplifiers
Convenient front-panel audio/video input with S-video for use
with video games or portable players
Six digital inputs (two optical and two coaxial on rear panel, and
one optical and one coaxial on front panel)
One coaxial digital output on rear panel
RS-232 port for firmware upgrades
IR remote extension jacks for control of the amplifier when
placed in a cabinet
Auxiliary input for connecting portable media players
Ease of Use
HDMI with audio processing and Faroudja DCDi Cinema video
processing with upscaling to 1080p
Adjustable A/V Sync Delay
EzSet/EQ equalization for quick and accurate system setup
FM stereo/AM tuner with 30 presets and direct-access tuning
Quadruple-crossover bass manager
Wide range of low-frequency crossover points (40Hz, 60Hz,
80Hz, 100Hz, 120Hz and 200Hz) available
Full-color, high-definition, graphical on-screen interface,
including HDMI and component video
Programmable power-up volume
Multiroom audio
Surround back amplifier channels configurable for use as
second-zone amplification
Seven-device, preprogrammed system remote control


Denumiri similare la Amplificator Harman/Kardon AVR-260: AVR 260, AVR260

Galerie