Cablu audio Van den Hul The MC Silver IT MK II Balanced It is common to produce High-End equipment with balanced inputs and outputs. With the actual version of our the MC - SILVER IT Mk II Coaxial interlink, it was not possible to meet this requirement. Therefore the MC - SILVER IT Mk II Balanced was designed. A rather uncommon design with a conductor configuration that is officially named: Tri-Axial. For all the metals in the MC - SILVER IT Mk II Balanced, we use the world’s highest grade of Matched Crystal (MC) Oxygen Free Copper (OFC) with a very thick mechanically (thus non-chemically) applied purest silver layer. This adds to the sonic qualities and prevents chemical deterioration, reducing any degeneration of the product. The centre group, acting as signal-up is made of 19 strands very dense silver coated MC OFC with a diameter of 0.16 mm. each. Over this centre group 2 layers of Teflon tape are applied. Then the first braiding, acting as signal return made of 72 x 0.075 mm. very dense silver coated MC OFC strands, follows. After this comes a second insulation layer with 4 sheets of Teflon. The outer group functioning as shield is made of 2 layers-First: a helically overlapping wound silver tape with dimensions 2.5 x 0.05 mm. -Second: a braiding of 216 strands made of 0.102 mm. very dense silver coated MC OFC. The outer 7.0 mm. diameter jacket is made of HULLIFLEX ® EHD. This specific insulation material is too costly to be used in all our products. In practice the sonic results are determined by the quality of the conductors. A lesser factor is the layout of the product. With superb conductor material, 95 % of the transmission quality is determined. Frequency range is a matter of layout and insulator parameters. Nevertheless, the frequency range of the MC - SILVER IT Mk II Balanced is 22 GHz. More than enough for a good analog system. The MC - SILVER IT Mk II Balanced is available stereo pair packed in luxe wooden box with XLR (balanced) connectors in 0.6, 0.8, 1.0, 1.2 and 1.5 m. lengths. The MC - SILVER IT Mk II Balanced is furthermore available in any other specified length starting from 60 cm.   ALTE SPECIFICATII: Product category: interconnect - Balanced, Unbalanced, Digital, Top-endDesign purpose: Interconnect for balanced signal transport at highest quality levelEff conductor: Core: 0.382 mm2; Intermediate conductor: 0.318 mm2 / Core: AWG 21.3; Intermediate conductor: ~AWG 22 / Core: 19; Intermediate conductor: 72; Screen: 216 + Ag tapeResistance: Core: 4.54 Ohm/100 m. ; Intermediate conductor: 5.14 Ohm/100 m. ; Screen: 0.908 Ohm/100 m. Capacitance: Core-Intermediate conductor: 105 pF/m. ; Intermediate conductor-Screen: 85.2 pF/m. Connector types: Neutrik XLR; Neutrik 1/4" (6.3 mm. ) Jack/Phone plug; Custom mountable on any ordered length. Standard sales units: Stereo pair packed in luxe wooden box with XLR (balanced) connectors in 0.6, 0.8, 1.0, 1.2 and 1.5 m. lengths; Other lengths: please consult your van den Hul dealer or the van den Hul distributor in your country. ]]>

Galerie