Cisco SG500-52-K9-G5

Localizare:
Traseu sugerat:  

Alte oferte pentru produsul

Descrierea produsului
Cisco SG500-52 48-Port Managed Stackable Gigabit Switch w/ 2x Combo & 2x 1GE/5GE SFP Ports, 500 Series SG500-52-K9-G5 Specificatiile producatorului  PerformanceSwitching capacity and forwarding rate (64-byte packets)77Switching Capacity (Gbps)120Layer 2 SwitchingSpanning Tree ProtocolStandard 802.1d Spanning Tree SupportFast convergence using 802.1w (Rapid Spanning Tree [RSTP]), enabled by defaultMultiple spanning tree instances using 802.1s (MSTP). 16 instances are supportedPort grouping/link aggregationSupport for IEEE 802.3ad Link Aggregation Control Protocol (LACP)Up to 8 groupsUp to 8 ports per group with 16 candidate ports for each (dynamic) 802.3ad LAGVLANSupport for up to 4096 VLANs simultaneouslyPort-based and 802.1Q tag-based VLANsMAC-based VLANManagement VLANPVE (Private VLAN Edge), also known as Protected Port, with multiple uplinksGuest VLANUnauthenticated VLANProtocol-based VLANCPE VLANVoice VLANVoice traffic is automatically assigned to a voice-specific VLAN and treated with appropriate levels of QoS. Auto voice capabilities deliver network-wide zero touch deployment of voice endpoints and call control devices. Multicast TV VLANMulticast VLAN used for video applications. Q-in-QVLANs transparently cross over a service provider network while isolating traffic among customers. GVRP/GARPGeneric VLAN Registration Protocol (GVRP) and Generic Attribute Registration Protocol (GARP) enable automatic propagation and configuration of VLANs in a bridged domain. DHCP Relay at Layer 2Relay of DHCP traffic to DHCP server in a different VLAN. Works with DHCP Option 82. IGMP (versions 1, 2, and 3) snoopingInternet Group Management Protocol (IGMP) limits bandwidth-intensive multicast traffic to only the requesters;supports 1000 multicast groups (source-specific multicasting is also supported). IGMP querierIGMP querier is used to support a Layer 2 multicast domain of snooping switches in the absence of a multicast router. HOL blockingHead-of-line (HOL) blocking. Layer 3IPv4 routingWirespeed routing of IPv4 packetsUp to 128 static routes and up to 128 IP interfacesCIDRSupport for Classless Inter-Domain RoutingRIP v2 (on 500X)Support for Routing Information Protocol version 2, for dynamic routingVRRP (on 500X)Virtual Router Redundancy Protocol (VRRP) delivers improved availability in a Layer 3 network by providing redundancy of the default gateway servicing hosts on the network. VRRP versions 2 and 3 are supported. Up to 255 virtual routers are supported. DHCP Relay at Layer 3Relay of DHCP traffic across IP domains. User Datagram Protocol (UDP) RelayRelay of broadcast information across Layer 3 domains for application discovery or relaying of BOOTP/DHCP packets. StackingHardware stackUp to 200 ports managed as a single system with hardware failover. High availabilityFast stack failover delivers minimal traffic loss. Plug-and-play stacking configuration/managementMaster/backup for resilient stack controlAuto-numberingHot swap of units in stackRing and chain stacking optionsAuto stacking port speedFlexible stacking port optionsHigh-speed stack interconnectsCost-effective 5G copper and high-speed 10G Fiber and Copper interfaces. Mixed stacking supportA stack can consist of a mix of SF500 and SG500 models (mix of 10/100 and Gigabit in the same stack). Hybrid stack (future)A mix of SF500, SG500, and SG500X in the same stack (10/100, Gigabit, and 10 Gigabit). SecuritySSHSecure Shell (SSH) Protocol secures Telnet traffic to and from the switch. SSH versions 1 and 2 are supported. SSLSecure Sockets Layer (SSL) encrypts all HTTPS traffic, allowing secure access to the browser-based managementUI in the switch. IEEE 802.1X (Authenticator role)RADIUS authentication and accounting, MD5 hash, guest VLAN, unauthenticated VLAN, single/multiple host mode and single/multiple sessionsSupports time-based 802.1XDynamic VLAN assignmentSTP BPDU GuardA security mechanism to protect the networks from invalid configurations. A port enabled for Bridge Protocol Data unit (BPDU) Guard is shut down if a BPDU message is received on that port. STP Root GuardPrevents a port from being selected as a root port, effectively preventing bridges in the LAN segment connected to the port from being a root bridge. DHCP snoopingFilters out DHCP messages with unregistered IP addresses and/or from unexpected or untrusted interfaces. IP Source Guard (IPSG)When IP Source Guard is enabled at a port, the switch filters out IP packets received from the port if the source IP addresses of the packets have not been statically configured or dynamically learned from DHCP snooping. Dynamic ARP Inspection (DAI)The switch discards ARP packets from a port if there is no static or dynamic IP/MAC bindings or if there is a discrepancy between the source or destination address in the ARP packet. Secure Core Technology (SCT)Ensures that the switch will receive and process management and protocol traffic no matter how much traffic is received. Layer 2 isolation (PVE) with community VLAN*Provides Layer 2 isolation between devices in the same VLAN; supports multiple uplinks. Port securityAbility to lock MAC addresses to ports, and limit the number of learned MAC addresses. RADIUS/TACACS+Supports RADIUS and TACACS authentication. Switch functions as a client. RADIUS accountingThe RADIUS accounting functions allow data to be sent at the start and end of services, indicating the amount of resources (such as time, packets, bytes, and so on) used during the session. Storm controlBroadcast, multicast, and unknown unicast. DoS preventionDoS attack prevention. Congestion avoidanceA TCP congestion avoidance algorithm is required to minimize and prevent global TCP loss synchronization. Multiple user privilege levels in CLILevels 1, 7, and 15 privilege levels. Quality of ServicePriority levels4 hardware queues (8 future)SchedulingStrict Priority and weighted round-robin (WRR)Class of servicePort based; 802.1p VLAN priority based; IPv4/v6 IP precedence/ToS/DSCP based; DiffServ; classification and re-marking ACLs, Trusted QoSQueue assignment based on differentiated services code point (DSCP) and class of service (802.1p/CoS)Rate limitingIngress policer; egress shaping and ingress rate control; per VLAN, per port, and flow basedIPv6IPv6IPv6 Host ModeIPv6 over EthernetDual IPv6/IPv4 stackIPv6 Neighbor and Router Discovery (ND)IPv6 Stateless Address AutoconfigurationPath MTU DiscoveryDuplicate Address Detection (DAD)ICMPv6IPv6 over IPv4 network with ISATAP tunnel supportUSGv6 and IPv6 Gold Logo certifiedIPv6 QoSPrioritize IPv6 packets in hardwareIPv6 ACLDrop or Rate Limit IPv6 packets in hardwareMLD SnoopingDeliver IPv6 multicast packets only to the required receiversIPv6 applicationsWeb/SSL, Telnet Server/SSH, Ping, Traceroute, SNTP, TFTP, SNMP, RADIUS, Syslog, DNS clientIPv6 RFC supportedRFC 2463 - ICMPv6RFC 3513 - IPv6 Address ArchitectureRFC 4291 - IP Version 6 Addressing ArchitectureRFC 2460 - IPv6 SpecificationRFC 2461 - Neighbor Discovery for IPv6RFC 2462 - IPv6 Stateless Address Auto-configurationRFC 1981 - Path MTU DiscoveryRFC 4007 - IPv6 Scoped Address ArchitectureRFC 3484 - Default address selection mechanismRFC 4214 - ISATAP tunnelingRFC 4293 - MIB IPv6: Textual Conventions and General GroupRFC 3595 - Textual Conventions for IPv6 Flow LabelManagementWeb user interfaceBuilt-in switch configuration utility for easy browser-based device configuration (HTTP/HTTPS). Supports configuration, system dashboard, system maintenance and monitoring. SNMPSNMP versions 1, 2c, and 3 with support for traps, and SNMP v3 User-based Security Model (USM)RMONEmbedded RMON software agent supports 4 RMON groups (history, statistics, alarms, and events) for enhanced traffic management, monitoring, and analysisIPv4 and IPv6 Dual StackCoexistence of both protocol stacks to ease migrationFirmware upgradeWeb browser upgrade (HTTP/HTTPS) and Trivial File Transfer Protocol (TFTP)Upgrade can be initiated through console port as wellDual images for resilient firmware upgradesPort mirroringTraffic on a port can be mirrored to another port for analysis with a network analyzer or RMON probe. Up to 8 source ports can be mirrored to one destination port. VLAN mirroringTraffic from a VLAN can be mirrored to a port for analysis with a network analyzer or RMON probe. Up to 8 source LANs can be mirrored to one destination port. DHCP (Options 66, 67, 82, 129, and 150)DHCP options facilitate tighter control from a central point (DHCP Server), to obtain IP address, auto configuration with configuration file download, and DHCP relay. Autoconfiguration with Secure Copy (SCP) file downloadEnables secure mass deployment with protection of sensitive data. Text-editable configsConfig files can be edited with a text editor and downloaded to another switch, facilitating easier mass deployment. SmartportsSimplified configuration of QoS and security capabilities. Auto SmartportsAutomatically applies the intelligence delivered through the Smartports roles to the port based on the devices discovered over Cisco Discovery Protocol or LLDP-MED. This facilitates zero touch deployments. Cisco Configuration Assistant ManagementManage devices from Cisco Configuration Assistant Management application. Secure Copy (SCP)Securely transfer files to and from the switch. Textview CLIScriptable CLI. A full CLI as well as a menu CLI is supported. Cloud ServicesSupport for Cisco Small Business FindIT network discovery utility. LocalizationLocalization of GUI and documentation into multiple languages. Login bannerConfigurable login banners for web as well as CLI. Time-based port operationLink up or down based on user-defined schedule (when the port is administratively up). Other managementTraceroute; single IP management; HTTP/HTTPS; SSH; RADIUS; port mirroring; TFTP upgrade; DHCP client; OOTP; Simple Network Time Protocol (SNTP); Xmodem upgrade; cable diagnostics; Ping; syslog; Telnet client (SSH secure support); Automatic time settings from Management Station. Green (Power Efficiency)Energy DetectAutomatically turns power off on Gigabit Ethernet RJ-45 port when detecting link down. Active mode is resumed without loss of any packets when the switch detects the link is up. Cable length detectionAdjusts the signal strength based on the cable length. Reduces the power consumption for cable shorter than 10m. supported on Gigabit Ethernet models. EEE compliant (802.3az)Supports IEEE 802.3az on all Gigabit copper ports. GeneralJumbo framesFrame sizes up to 10K. Bare supported on 10/100 and Gigabit Ethernet interfaces. The default MTU is 2K. MAC table16,000 MAC addresses. DiscoveryBonjourThe switch advertises itself using the Bonjour protocol. LLDP (802.1ab) with LLDP-MED extensionsLink Layer Discovery Protocol (LLDP) allows the switch to advertise its identification, configuration, and capabilities to neighboring devices that store the data in a MIB. LLDP-MED is an enhancement to LLDP that adds the extensions needed for IP phones. Cisco Discovery ProtocolThe switch advertises itself using the Cisco Discovery Protocol (CDP). It also learns the connected device and its characteristics via CDP. Product SpecificationsPower Consumption/ Energy Detect110V/0.226A/13.7W220V/0.160A/14.8W Heat Dissipation (BTU/hr)46.5Ports48 10/100/1000 + 4 GE (5G Stacking)ButtonsReset buttonCabling typeUnshielded twisted pair (UTP) Category 5 or better; Fiber options (SMF and MMF); Coaxial SFP+ for stacking purposesLEDsSystem, Link/Act, PoE, SpeedFlash32 MB800 MHz ARM CPU memory256 MBPacket Buffer8MbUnit Dimensions (W x H x D)440 x 44 x 257 mmUnit weight3.09 kgPower100-240V 47-63 Hz, internal, universalCertificationUL (UL 60950), CSA (CSA 22.2), CE mark, FCC Part 15 (CFR 47) Class ATemperatureOperating temperature32° to 104°F (0° to 40°C)Storage temperature-4° to 158°F (-20° to 70°C)Operating humidity10% to 90%, relative, noncondensingStorage humidity10% to 90%, relative, noncondensingWarrantyLimited lifetime with next-business-day advance replacement (where available, otherwise same day ship)Package ContentsCisco Small Business SG500-52 Stackable Managed SwitchPower cordMounting hardwareSerial cableCD-ROM with user documentation (PDF) includedQuick Start GuideMinimum RequirementsWeb browser: Mozilla Firefox version 3.6 or later; Microsoft Internet Explorer version 7 or laterCategory 5 Ethernet network cableTCP/IP, network adapter, and network operating system (such as Microsoft Windows, Linux, or Mac OS X) installed
Denumiri similare la Switch Cisco SG500-52-K9-G5: SG 500 52 K 9 G 5, SG50052K9G5, SG500 52 K9 G5, SG 500-52-K9-G5, SG500 52-K9-G5
Păreri
Intrebari&Raspunsuri

Prețurile și informațiile de pe paginile noastre sunt furnizate de magazinele partenere și au caracter informativ, unele erori pot apărea. Imaginile produselor au caracter informativ, uneori pot include niște accesorii care nu sunt mereu incluse în pachetul de baza. Informațiile aferente produsului (imagine, descriere, preț) se pot schimba fără notificare prealabilă. Compari.ro nu își asumă responsabilitate pentru eventualele greșeli.

^